# Rhino Horn Implant Lite

## Electronics

### Rhino Horn Implant Lite - specific steps

1. add battery
2. assemble plastic shield and seal the edges with superglue and hot glue

## Mechanics

1. resin casting in the mould (Electrolube PU resin UR5528, cca. 12g/piece)
2. engraving of serial numbers (01 0051 - 01 0065, laser parameters: power 30%, speed 150 mm/s)

{% file src="/files/-MFeY18PyOK3TS8iMXKA" %}

## Final checks

1. tune LoRa antenna (120 mm length)
2. provisioning + send correct settings
3. final test
4. packaging
5. final check on TTN
6. shipping

![](/files/-MSSTNYhr6Zrfx8CKPBK)

## Assembly

![](/files/-MSSTNYiQqr61ADrXhAX)

![](/files/-MSSTNYji9Odlr5JjLnQ)

![](/files/-MSSTNYkJeuM8OGKkYM4)

![](/files/-MSSTNYgJaFXFCAAdpUH)

![](/files/-MMz9j5op2eD5-Vmoytk)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://irnas.gitbook.io/opencollar/-MDJCI9OmpOqWrQzjNIR/manufacturing/rhino-tracker/rhino-horn-implant-lite.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.